Tractor unit construction


Our service department constructs tractor units according to the customer's wishes.
 
 Among other things, we can offer:
• Hydraulics construction.
• Gallows for light, air and hydraulics couplings with waste tray.
• Stainless plate behind the driver's cabin between screen and back stool.
• Side skirt in stainless plate.
• Plywood tool cabinet covered with stainless plate.
 

NIELSEN & KOKKERSVOLD AS

The tractor unit has been fitted with:
The tractor is built with:
• Compressor GD 175 incl. hydraulic motor, piping and hose.
• Stainless parking, for hose from compressor.
• Hydrapak incl. hydraulic pump and hose connections.
• Hydrapak and compressor switching valve incl. quick couplings in front of the stool and on the left side at the 2nd shaft.
• Stainless steel cabinet on the right side of the chassis, side hinged door, shelf in the center
• Drawer at the top of the closet. Original Scania side cover is split and mounted on the door.
• Stainless frame between cabin and stool.
• Small door in the door for hydraulic couplings, and small door for oil filling.
• Aluminum dryer is alloyed in color natural. The door is easy to remove.
• Aluminum cover on the chassis behind the stool. Aluminum dryer is alloyed in color natural. The door is easy to remove.
• Plate bag cabin, fitted with air and electric plug, the plate is bent in aluminum door.
• Aluminum dryer is alloyed in color natural.
• Cover between screens incl. Aluminum dryer on horizontal surfaces.
• Aluminum dryer is alloyed in color natural. The door is easy to remove.
• Assembly of 2 pcs. plastic box for fire extinguisher, mounted behind the cab on fittings on the right side.
• Assembly of 4 pcs. fluorescent lights, with diodes 2 pcs. in front of and 2 pcs. in the back.
• Plate under spoiler, behind cabin fitted with 2 pieces. 3-chamber lamps with chrome ring and 2 pcs. flash light and 2 pieces. work light, possibly on the side of the skirt.
• Mounting of wide diode light signs.
• Assembly of 4 pcs. work lights with diodes 2 pcs. in steps below the door and 2 pcs. rear side spoiler behind cab.
• Rustfribelle on roof incl. 2 pcs. Xenon lights and 2 flashlights with flash.
• Painting of worklights by steps, rust-proof pillar on roof, plate under skirt, side cover between 2 and 3 axles, various small fittings and plastic boxes for fire extinguishers.
 

Skave Maskinstation

The tractor unit is fitted with:
• Installation of variable hydraulics, for driving to the Golden Trailer.
• Installation oil cooler.
• Installation of the tip valve.
• Installation stainless steel hinges.
• Installation the Nato connector.
• Installation of brake valves for brake air.
• Installation of camera cable in the hose.
• Installation a stainless steel frame with a clear stainless steel plate in front of the stool.
• Installation a blank, stainless steel plate under the stool.
• Installation a blank stainless steel plate on the chassis behind the stool.
• Mounting between shields, with a clear stainless steel plate on horizontal surfaces.
• Installation top plate with luminaire mounting under top spoiler.
• Installation side marker lamps on side of stainless steel plate.
• Painting between screens and top plates under spoiler.
 

Eliassons Åkeri AB

The tractor unit is fitted with:
• Installation of compressor Garden Denver 175, compressor pulled by cardan.
• Stainless steel cabinet with electrical outlet.
• Original Scania side cover on lid of cabinet.
• 6 pieces. Work lamps. 2 pcs. By step by car, 2 pcs. On the chassis in the back, 2 pcs. On the backside of the cabin.
• Air cylinder on the stool for moving the stool.
• 2 pcs. Plastic closure for fire extinguisher, on the backside of the cab.
• Aluminium cover on chassis, behind the stool.
• Rustproof frame, fitted with aluminium door in front of the stool.
• Aluminium door under existing hanger.
• Auction of aluminium door, in the colour nature.
• Mounting of parking, for compressor hose.
 

Lemvig Biogasanlæg AMBA

We have fitted hydraulic structure with variable hydraulics. Hydraulic tank mounted on the side of the chassis. Sturdy frame fitted with aluminum door, front stool. Door panels are alloyed in color “nature”. Aluminum cover on the chassis behind the stool. The door plate is alloyed in color “nature”.

Rustproof hinges are installed behind the cab with hydraulic connections and original electrical and air connections. On the side of the gallows, oil cooler is fitted with a round, stainless steel cover. On the side of the chassis, the veneer closet is fitted with a stainless steel cover with a battery cover. In the other half of the cabinet, there are shelves, lights and heat installed for cooling water on the truck and the chassis is fitted with a smooth, rustproof side cover.
 

Vårgårda Herrljunga Biogas AB

Hydraulic structure with variable hydraulic pump, stainless steel tank behind the cab, oil cooler mounted on the right side of the hydraulic tank. Original electrical connections and air connections mounted in brackets on top of the tank.
 
 
 
 
 

Trond Råkil Transport AS

We have fitted two stainless steel cabinets behind the cab, stainless steel side cover between the first and second axle right and left. Original side marker lamps mounted in side cover. Stainless frame fitted with aluminum door plate between stool and cabin. The cover plate is anodized in color nature and is easy to remove. Door plate mounted behind the chassis stool, it is also anodised and easy to dismantle. In addition, stainless steel plate is fitted behind the cab with original electrical connections and air.
 

Trond Råkil Transport AS

We have fitted veneer closet with stainless steel cover and blank door, rustproof side cover between first and second axle, right and left side. Original side marker lamps mounted in side cover. Stainless frame fitted with aluminum door plate between stool and cabin. The cover plate is anodized in color nature and is easy to remove. Door plate mounted behind the chassis stool, it is also anodised and easy to dismantle. In addition, stainless steel plate is fitted behind the cab with original electrical connections and air.
 

TROND RÅKIL TRANSPORT AS

The tractor unit is fitted with:
• A compressor incl. kardan, pipwork and manometer.
• A stainless cabinet on the right side of the chassis, with power open. Original Scania side cover is mounted on the door
• A stainless frame between cabin and stool.
 Aluminum dryer is alloyed in color natural.
                                                                    The door is easy to  remove.
• A aluminum cover on the chassis behind the stool. Aluminum dryer is alloyed in color natural. The door is  easy to remove.
 

Skinnerup Maskinstation I/S

The tractor unit is fitted with: 
• A hydraulic structure with variable hydraulic pump (for e.g. pulling a liquid manure trailer)
• Alu floor plates mounted from cabin to trailer connection, and backwards from trailer connection
• Rustproof side covers
• Side cabinets
• Rustproof panel in existing gallows
• TIP valve
 
 

Tychsen Transport

The tractor unit has been fitted with:
• A stainless steel frame with aluminium floor on
   the horizontal surface behind the driver's cab.
• An aluminium floor behind the trailer connection.
• A stainless steel gallows fitted with aluminium
   flooring.
• A floor plate anodised in black.
• Stainless steel polished decking on both sides.
• A plywood battery cabinet clad with polished
   stainless steel plate.
• A stainless steel fuel tank fitted behind the decking.
• A polished stainless steel light bar and plate mounted with lights above the driver's cab.
 
 

Maabjerg Energy Center

 
For five new tractor units, hydraulic tanks and oil coolers have been moved from the old tractor units. The hydraulics have been changed from fixed displacement to running with a variable flow pump. The trailers have been adapted to run with variable flow pumps.
 
 

Thise Mejeri a.m.b.a

 
Three new tractor units have been equipped with Hydrapack hydraulic systems in order to reduce weight.
 
 
 
 
 
 

Linkogas AmbA

 
Construction of tractor unit, including hydraulic couplings for a liquid manure trailer Side screening is in black plate that has been metallised and painted.
 
 
 
 
 

Brdr. Færch Transport A/S

 
Construction of tractor unit with aluminium floor at the front and back, at the trailer connection and in the gallows. Stainless steel covers have been fitted between axles 1 and 2 on both sides, as well as between the screens. The covers between the screens have storage spaces below the floor.
 
 
 

Søren Bo Larsen

 
Construction of tractor unit with aluminium floor at the front and back, at the trailer connection. The plywood tool cabinet is clad in stainless steel. There is also a stainless, bright annealed cover between axles 1 and 2 on both sides.
Sales Consultant
Lars Lykkevold Johansen
+45 99 48 33 19
Reservedele